NF ISO 10110-8

NF ISO 10110-8

November 2010
Standard Cancelled

Optics and photonics - Preparation of drawings for optical elements and systems - Part 8 : surface texture - Roughness and waviness

ISO 10110 specifies the presentation of design and functional requirements for optical elements in technical drawings used for manufacturing and inspection. This part of ISO 10110 specifies rules for the indication of the surface texture of optical elements. Surface texture is the characteristic of a surface that can be effectively described with statistical methods. Typically, surface texture is associated with high spatial frequency errors (roughness) and mid-spatial frequency errors (waviness). This part of ISO 10110 is primarily intended for the specification of polished optics. This part of ISO 10110 describes a method for characterizing the residual surface that is left after detrending by subtracting the surface form.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

November 2010

Number of pages

24 p.

Reference

NF ISO 10110-8

ICS Codes

01.100.20   Mechanical engineering drawings
37.020   Optical equipment

Classification index

S10-008-8

Print number

1 - 10/11/2010

International kinship

ISO 10110-8:2010
Sumary
Optics and photonics - Preparation of drawings for optical elements and systems - Part 8 : surface texture - Roughness and waviness

ISO 10110 specifies the presentation of design and functional requirements for optical elements in technical drawings used for manufacturing and inspection.

This part of ISO 10110 specifies rules for the indication of the surface texture of optical elements. Surface texture is the characteristic of a surface that can be effectively described with statistical methods. Typically, surface texture is associated with high spatial frequency errors (roughness) and mid-spatial frequency errors (waviness).

This part of ISO 10110 is primarily intended for the specification of polished optics.

This part of ISO 10110 describes a method for characterizing the residual surface that is left after detrending by subtracting the surface form.

Replaced standards (1)
NF ISO 10110-8
November 1998
Standard Cancelled
Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 8 : surface texture.

Le présent document constitue la huitième partie de la norme NF ISO 10110 relative aux indications sur les dessins d'optique, et s'applique aux indications d'état de surface.

Standard replaced by (1)
NF ISO 10110-8
May 2020
Standard Current
Optics and photonics - Preparation of drawings for optical elements and systems - Part 8 : surface texture

<p>This document specifies rules for the indication of the surface texture of optical elements, in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Surface texture is the characteristic of a surface that can be effectively described with statistical methods. Typically, surface texture is associated with high spatial frequency errors (roughness) and mid-spatial frequency errors (waviness).</p> <p>This document is primarily intended for the specification of polished optics.</p> <p>This document describes a method for characterizing the residual surface that is left after detrending by subtracting the surface form. The control of the surface form specified in ISO 10110-5, ISO 10110-12, and ISO 10110-19 is not specified in this document.</p>

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Description de l'état de surface
  • 5 Indication figurant sur les dessins
  • Annexe A (informative) Spécification de l'état de surface des surfaces optiquement lisses en termes de microdéfauts
  • Annexe B (informative) Relation entre l'état de surface et les caractéristiques de diffusion des surfaces complexes
  • Annexe C (informative)
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ