NF ISO 10791-1

NF ISO 10791-1

March 2016
Standard Current

Test conditions for machining centres - Part 1 : geometric tests for machines with horizontal spindle (horizontal Z-axis)

ISO 10791-1:2015 specifies, with reference to ISO 230 1, the geometric tests for machining centres (or other numerically controlled machines, where applicable) with horizontal spindle (i.e. horizontal Z-axis).It applies to machining centres having three numerically controlled linear axes (X-axis up to 5 000 mm length, Y-axis up to 3 200 mm length, and Z-axis up to 2 000 mm length), but refers also to supplementary movements, such as those of rotary, tilting, and swivelling tables. Movements other than those mentioned are considered as special features and the relevant tests are not included.It takes into consideration four possible types of tables, fixed and rotary: horizontal non-rotating tables; tables rotating around a vertical B'-axis; tables rotating around a vertical B'-axis and tilting around a horizontal A'-axis; tables rotating around a horizontal A'-axis and swivelling around a vertical B'-axis.It does not consider accessory spindle heads, which are covered by ISO 17543-1.ISO 10791-1:2015 deals only with the verification of geometric accuracy of the machine and does not apply to the testing of the machine operation, which should generally be checked separately. Tests not concerning the pure geometric accuracy of the machine are dealt with in other parts of ISO 10791.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2016

Number of pages

91 p.

Reference

NF ISO 10791-1

ICS Codes

25.040.10   Machining centres

Classification index

E60-172-1

Print number

1

International kinship

ISO 10791-1:2015
Sumary
Test conditions for machining centres - Part 1 : geometric tests for machines with horizontal spindle (horizontal Z-axis)

ISO 10791-1:2015 specifies, with reference to ISO 230 1, the geometric tests for machining centres (or other numerically controlled machines, where applicable) with horizontal spindle (i.e. horizontal Z-axis).

It applies to machining centres having three numerically controlled linear axes (X-axis up to 5 000 mm length, Y-axis up to 3 200 mm length, and Z-axis up to 2 000 mm length), but refers also to supplementary movements, such as those of rotary, tilting, and swivelling tables. Movements other than those mentioned are considered as special features and the relevant tests are not included.

It takes into consideration four possible types of tables, fixed and rotary: horizontal non-rotating tables; tables rotating around a vertical B'-axis; tables rotating around a vertical B'-axis and tilting around a horizontal A'-axis; tables rotating around a horizontal A'-axis and swivelling around a vertical B'-axis.

It does not consider accessory spindle heads, which are covered by ISO 17543-1.

ISO 10791-1:2015 deals only with the verification of geometric accuracy of the machine and does not apply to the testing of the machine operation, which should generally be checked separately. Tests not concerning the pure geometric accuracy of the machine are dealt with in other parts of ISO 10791.

Replaced standards (1)
NF ISO 10791-1
February 1999
Standard Cancelled
Test conditions of machining centres. Part 1 : geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z axis).

Le présent document, qui fait partie d'un ensemble de 12 documents traitant des conditions de réception des centres d'usinage, définit les essais géométriques des machines à broche horizontale et à têtes accessoires.

Table of contents
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Observations préliminaires
  • 4 Vérifications géométriques
  • Annexe A(normative) Tables horizontales non rotatives
  • Annexe B(normative) Tables tournant autour d'un axe vertical B'
  • Annexe C(normative) Tables tournant autour d'un axe vertical B' et basculant autour d'un axe horizontal A'
  • Annexe D(normative) Tables tournant autour d'un axe horizontal A' et pivotant autour d'un axe vertical B'
  • Annexe E(informative) Erreurs de mouvements de la broche porte-outil et des axes de la table porte-pièce rotative
  • Annexe F(informative) Erreurs de mouvements des axes de rotation des tables rotatives et basculantes (voir Annexe C)
  • Annexe G(informative) Erreurs de mouvements des axes de rotation des tables rotatives et pivotantes (voir Annexe D)
  • Bibliographie
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ