ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement, and to provide an open interconnect system for electronic systems used by agricultural and forestry equipment. ISO 11783-2:2012 defines and describes the network's 250 kbit/s, twisted, non-shielded, quad-cable physical layer.
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or implement, and to provide an open interconnect system for electronic systems used by agricultural and forestry equipment. ISO 11783-2:2012 defines and describes the network's 250 kbit/s, twisted, non-shielded, quad-cable physical layer.
L'ISO 11783, qui comprend 11 parties, prescrit un réseau de commande et de communication de données en série pour tracteurs agricoles ou forestiers, ou instruments portés, semi-portés, remorqués ou automoteurs pour normaliser la méthode et le format de transfert des données. Le présent document définit et décrit une couche physique à câble à quatre conducteurs torsadés, pour une vitesse de transfert de 250 kbits/sec.
La NF ISO 11783, qui comprend 11 parties, prescrit un réseau de commande et de communication de données en série pour tracteurs agricoles ou forestiers, ou instruments portés, semi-portés, remorqués ou automoteurs pour normaliser la méthode et le format de transfert des données. Le présent document modifie la NF ISO 11783-2 qui définit et décrit une couche physique à câble à quatre conducteurs torsadés, pour une vitesse de transfert de 250 kbits/sec. Il ajoute à l'Annexe B un nouvel article portant sur le connecteur de cabine facultatif.
ISO 11783 specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements, and information-storage and -display units, whether mounted on, or part of, the tractor or implement. ISO 11783 also provides an open interconnect system for on-board electronic systems used by agriculture and forestry equipment. It is intended to enable electronic control units (ECUs) to communicate with each other, providing a standardized system. This document defines and describes the network's 250 kbit/s, twisted, non-shielded, quad-cable physical layer and an alternative cable and architecture named twisted pair physical layer (TPPL) based on a 250 kbit/s, un-shielded, twisted pair cable network layer which is fully backward compatible to twisted quad based machines and devices. NOTE Where not differently specified, requirements are valid for both twisted quad and TPPL.
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ