NF ISO 13165-3

NF ISO 13165-3

June 2017
Standard Cancelled

Water quality - Radium-226 - Part 3 : test method using coprecipitation and gamma-spectrometry

ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589‑3).The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq l−1 using a sample volume of 1 l to 100 l of any water type.For water samples smaller than a volume of 1 l, direct gamma-spectrometry can be performed following ISO 10703 with a higher detection limit.NOTE This test method also allows other isotopes of radium, 223Ra, 224Ra, and 228Ra, to be determined.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

June 2017

Number of pages

22 p.

Reference

NF ISO 13165-3

ICS Codes

13.060.60   Examination of physical properties of water
17.240   Radiation measurements

Classification index

M60-811-3

Print number

1

International kinship

Sumary
Water quality - Radium-226 - Part 3 : test method using coprecipitation and gamma-spectrometry

ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589‑3).

The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq l−1 using a sample volume of 1 l to 100 l of any water type.

For water samples smaller than a volume of 1 l, direct gamma-spectrometry can be performed following ISO 10703 with a higher detection limit.

NOTE This test method also allows other isotopes of radium, 223Ra, 224Ra, and 228Ra, to be determined.

Replaced standards (1)
NF M60-803-2
June 2012
Standard Cancelled
Nuclear energy - Measurement of radioactivity in the environment - Water - Part 2 : measurement of radium 226 activity in water - Method by coprecipitation and gamma spectrometry

Le présent document expose les principes et les difficultés de la détermination de l'activité du radium 226, dans tous types d'eaux par spectrométrie gamma. La méthode est applicable à tous les types d'eaux d'activités en 226Ra soluble supérieures à 0,02 Bq.L-1. Cette méthode permet en outre de mesurer les autres isotopes naturels en radium (radium 223, radium 224 et radium 228) .

Standard replaced by (1)
NF EN ISO 13165-3
February 2020
Standard Current
Water quality - Radium-226 - Part 3 : test method using coprecipitation and gamma-spectrometry

ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589‑3). The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq l−1 using a sample volume of 1 l to 100 l of any water type. For water samples smaller than a volume of 1 l, direct gamma-spectrometry can be performed following ISO 10703 with a higher detection limit. NOTE This test method also allows other isotopes of radium, 223Ra, 224Ra, and 228Ra, to be determined.

Table of contents
  • Avant-propos
  • 1
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Symboles
  • 5 Principe du mesurage
  • 6 Réactifs et équipement
  • 7 Échantillonnage
  • 8 Modes opératoires
  • 9 Programme d'assurance qualité et de contrôle de la qualité
  • 10 Expression des résultats
  • 11 Expression des résultats
  • Annexe A (informative) L'uranium et sa chaîne de désintégration
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ