NF ISO 6195

NF ISO 6195

December 2006
Standard Cancelled

Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances

ISO 6195:2002 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm.ISO 6195:2002 is applicable to the following four housing designs.Type A: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).Type B: open recessed housings for wipers with integral rigid enforcement, that are a press-fit in the housing.Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement).Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers.ISO 6195:2002 does not otherwise specify the style, configurations, materials, or performance ratings for the wiper ring.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

December 2006

Number of pages

19 p.

Reference

NF ISO 6195

ICS Codes

23.100.20   Cylinders

Classification index

E48-038

Print number

1 - 29/11/2006

International kinship

ISO 6195:2002
Sumary
Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances

ISO 6195:2002 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm.

ISO 6195:2002 is applicable to the following four housing designs.

  • Type A: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).
  • Type B: open recessed housings for wipers with integral rigid enforcement, that are a press-fit in the housing.
  • Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement).
  • Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers.

ISO 6195:2002 does not otherwise specify the style, configurations, materials, or performance ratings for the wiper ring.

Replaced standards (1)
NF E48-038
September 1991
Standard Cancelled
Hydraulic fluid power. Cylinders. Wiper ring housings for rods. Dimensions.

La présente norme est destinée à faciliter l'interchangeabilité des joints racleurs pour tiges de piston. Pour cela, elle fixe les dimensions et les tolérances des logements auxquels doivent se conformer les fabricants de joints.

Standard replaced by (1)
NF ISO 6195
May 2013
Standard Cancelled
Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances

ISO 6195:2013 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm. ISO 6195:2013 is applicable to the following five housing designs. Type A: recessed housings with undercut or separate cover to retain elastomeric wipers. Type B: open recessed housings for wipers with integral rigid enforcement, that are press-fit in the housing. Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement). Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers. Type E: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).

Table of contents
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Symboles littéraux
    2
  • 5 Généralités
    2
  • 6 Dimensions et tolérances
    2
  • 7 État de surface
    11
  • 8 Chanfrein d'entrée
    11
  • 9 Phrase d'identification (Référence à la présente Norme internationale)
    12
  • Bibliographie
    13
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ