NF ISO 6195
Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances
ISO 6195:2013 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm. ISO 6195:2013 is applicable to the following five housing designs. Type A: recessed housings with undercut or separate cover to retain elastomeric wipers. Type B: open recessed housings for wipers with integral rigid enforcement, that are press-fit in the housing. Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement). Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers. Type E: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).
ISO 6195:2013 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm.
ISO 6195:2013 is applicable to the following five housing designs.
- Type A: recessed housings with undercut or separate cover to retain elastomeric wipers.
- Type B: open recessed housings for wipers with integral rigid enforcement, that are press-fit in the housing.
- Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement).
- Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers.
- Type E: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).
<p>ISO 6195:2002 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm.</p> <p>ISO 6195:2002 is applicable to the following four housing designs.</p> <ul><li>Type A: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).</li><li>Type B: open recessed housings for wipers with integral rigid enforcement, that are a press-fit in the housing.</li><li>Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement).</li><li>Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers.</li></ul> <p>ISO 6195:2002 does not otherwise specify the style, configurations, materials, or performance ratings for the wiper ring.</p>
<p>This document specifies dimensions and tolerances of housings for wiper-rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 450 mm.</p>
- Avant-proposiv
- Introductionv
-
1 Domaine d'application1
-
2 Références normatives2
-
3 Termes et définitions2
-
4 Symboles littéraux2
-
5 Généralités3
-
6 Spécifications pour les logements3
-
6.1 Logement de type A3
-
6.2 Logement de type B4
-
6.3 Logement de type C6
-
6.4 Logement de type D9
-
6.5 Logement de type E11
-
7 Autres spécifications concernant les dimensions14
-
8 État de surface14
-
9 Phrase d'identification (Référence à la présente Norme internationale)15
- Bibliographie16
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ