NF ISO 8528-3

October 2005

Standard Cancelled

Reciprocating internal combustion engine driven alternating current generating sets - Part 3 : alternating current generators for generating sets

ISO 8528-3:2005 specifies the principal characteristics of Alternating Current (a.c.) generators under the control of their voltage regulators when used in generating set applications. It supplements the requirements of IEC 60034-1.ISO 8528-3:2005 applies to a.c. generators used in a.c. generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives.For some specific applications (e.g. essential hospital supplies, high-rise buildings) supplementary requirements may be necessary. The provisions of ISO 8528-3:2005 should be regarded as the basis for establishing any supplementary requirements.For a.c. generating sets driven by other reciprocating-type prime movers (e.g. steam engines), the provisions of ISO 8528-3:2005 should be used as a basis for establishing these requirements.

View the extract

Main informations

Collections

National standards and national normative documents

Publication date

October 2005

Number of pages

20 p.

Reference

NF ISO 8528-3

ICS Codes

27.020 Internal combustion engines

29.160.40 Generating sets

Classification index

E37-303

Print number

1 - 05/10/2005

International kinship

ISO 8528-3:2005

Sumary

Reciprocating internal combustion engine driven alternating current generating sets - Part 3 : alternating current generators for generating sets

ISO 8528-3:2005 applies to a.c. generators used in a.c. generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives.

For some specific applications (e.g. essential hospital supplies, high-rise buildings) supplementary requirements may be necessary. The provisions of ISO 8528-3:2005 should be regarded as the basis for establishing any supplementary requirements.

For a.c. generating sets driven by other reciprocating-type prime movers (e.g. steam engines), the provisions of ISO 8528-3:2005 should be used as a basis for establishing these requirements.

Replaced standards (1)

NF ISO 8528-3

September 1994

Standard Cancelled

Reciprocating internal combustion engine driven alternating current generating. Part 3 : alternating current generators for generating sets.

Standard replaced by (1)

NF ISO 8528-3

January 2021

Standard Current

Reciprocating internal combustion engine driven alternating current generating sets - Part 3 : alternating current generators for generating sets

This document specifies the principal characteristics of alternating current (a.c.) generators under the control of their excitation control system when used for reciprocating internal combustion (RIC) engine driven generating set applications and supplements the requirements given in IEC 60034-1. It covers the use of such a.c. generators for land and marine applications, excluding generating sets used on aircraft or to propel land vehicles and locomotives. NOTE For some specific applications (e.g. essential hospital supplies, high-rise buildings, operation parallel with the grid), supplementary requirements can be necessary. The provisions of this document can be regarded as the basis for establishing any supplementary requirements. For a.c. generating sets driven by other reciprocating-type prime movers (e.g. steam engines) the provisions of this document can be used as basis for establishing these requirements.

Table of contents

Avant-propos
iv
1
Domaine d'application 1
2
Références normatives 1
3
Symboles, termes et définitions 2
4
Autres règlements et exigences supplémentaires 6
5
Caractéristiques assignées 6
5.1
Généralités 6
5.2
Puissance assignée de base (BR) 6
5.3
Puissance continue de crête (PR) 7
6
Échauffement et températures limites 7
6.1
Puissance assignée de base 7
6.2
Puissance continue de crête 7
7
Caractéristiques relatives à la puissance assignée et à la vitesse assignée 7
8
Caractéristiques relatives à la tension 8
9
Fonctionnement couplé 8
10
Conditions de charge particulières 8
10.1
Généralités 8
10.2
Déséquilibre du courant de charge 8
10.3
Courant de court-circuit permanent 8
10.4
Capacités de surintensité occasionnelle 9
10.5
Facteur harmonique téléphonique (FHT) 9
10.6
Suppression des perturbations radioélectriques (F) 9
11
Effet des vibrations électromécaniques sur des groupes en fonctionnement couplé 9
12
Génératrices asynchrones avec système d'excitation 9
12.1
Généralités 9
12.2
Courant de court-circuit permanent 9
12.3
Plage de réglage de la tension 10
12.4
Fonctionnement couplé 10
13
Valeurs limites des caractéristiques de fonctionnement 10
14
Plaque signalétique 11
Annexe A (normative) Caractéristique de tension transitoire d'un alternateur à la suite d'une brusque variation de charge
12

ZOOM ON ... the Requirements department

To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!

Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ