XP ISO/TS 21268-2

XP ISO/TS 21268-2

October 2007
Standard Cancelled

Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2 : batch test using a liquid to solid ratio of 10 l/kg dry matter

La présente partie de l'ISO/TS 21268 spécifie un essai fournissant des informations sur la lixiviation des sols et des matériaux du sol de granularité inférieure ou égale à 4 mm dans un rapport liquide/solide égal à 10 I/kg de matière sèche. Le mode opératoire spécifié dans la présente partie de l'ISO/TS 21268 permet d'obtenir un éluat qui est ensuite caractérisé par des méthodes physiques, chimiques et écotoxicologiques normalisées.

Main informations

Collections

National standards and national normative documents

Publication date

October 2007

Number of pages

25 p.

Reference

XP ISO/TS 21268-2

ICS Codes

13.080.05   Examination of soils in general

Classification index

X31-607-2

Print number

1 - 22/10/2007

International kinship

Sumary
Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2 : batch test using a liquid to solid ratio of 10 l/kg dry matter

La présente partie de l'ISO/TS 21268 spécifie un essai fournissant des informations sur la lixiviation des sols et des matériaux du sol de granularité inférieure ou égale à 4 mm dans un rapport liquide/solide égal à 10 I/kg de matière sèche. Le mode opératoire spécifié dans la présente partie de l'ISO/TS 21268 permet d'obtenir un éluat qui est ensuite caractérisé par des méthodes physiques, chimiques et écotoxicologiques normalisées.
Standard replaced by (1)
XP CEN ISO/TS 21268-2
December 2009
Standard Cancelled
Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2 : batch test using a liquid to solid ratio of 10 l/kg dry matter

<p>ISO/TS 21268-2:2007 specifies a test providing information on leaching of soil and soil materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 10 l/kg dry matter. It applies to soil and soil material with a particle size less than or equal to 4 mm.</p> <p>ISO/TS 21268-2:2007 has been developed to measure the release of inorganic and organic constituents from soil and soil material and the ecotoxicological effects of eluates with respect to micro-organisms, fauna and flora. The test is not suitable for constituents that are volatile under ambient conditions. For ecotoxicological testing, see ISO 15799. </p> <p>The test procedure specified in ISO/TS 21268-2:2007 produces eluates, which are subsequently characterised by existing physical, chemical and ecotoxicological standard methods.</p> <p>This test is mainly aimed at being used for routine and control purposes, and it cannot be used alone to describe all leaching properties of a soil. Additional leaching tests are needed for that extended goal. ISO/TS 21268-2:2007 does not address issues related to health and safety. It only determines the leaching properties.</p>

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    2
  • 3 Termes et définitions
    2
  • 4 Principe
    4
  • 5 Réactifs
    4
  • 6 Appareillage
    4
  • 7 Prétraitement des échantillons
    6
  • 7.1 Taille des échantillons
    6
  • 7.2 Fractionnement granulométrique
    6
  • 7.3 Détermination du rapport entre taux de matière sèche et taux d'humidité
    7
  • 7.4 Préparation de la prise d'essai
    7
  • 8 Mode opératoire
    7
  • 8.1 Conditions d'essai
    7
  • 8.2 Description du mode opératoire
    8
  • 8.3 Préparation complémentaire de l'éluat pour analyse
    9
  • 8.4 Essai à blanc de réalisation du mode opératoire de lixiviation
    9
  • 9 Calculs
    10
  • 10 Rapport d'essai
    10
  • 11 Dosage analytique
    11
  • 11.1 Généralités
    11
  • 11.2 Calculs et informations relatives à l'essai à blanc
    11
  • 12 Caractéristiques de performance
    11
  • Annexe A (informative) Informations relatives à l'incidence sur les résultats d'essai des paramètres influençant la lixiviation
    12
  • Annexe B (informative) Exemple de mode opératoire de séparation liquide-solide spécifique des échantillons de sol (applicable uniquement à la lixiviation des constituants inorganiques)
    15
  • Bibliographie
    17
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ