NF ISO 13379-1

NF ISO 13379-1

June 2012
Standard Current

Condition monitoring and diagnostics of machines - Data interpretation and diagnostics techniques - Part 1 : general guidelines

This part of ISO 13379 gives guidelines for the data interpretation and diagnostics of machines. It is intended to — allow the users and manufacturers of condition monitoring and diagnostics systems to share common concepts in the fields of machine diagnostics; — enable users to prepare the necessary technical characteristics that are used for the further diagnosis of the condition of the machine; — give an appropriate approach to achieve a diagnosis of machine faults. Since these are general guidelines, a list of the machine types addressed is not included. However, the machine sets covered by this part of ISO 13379 normally include industrial machines such as turbines, compressors, pumps, generators, electrical motors, blowers, gearboxes, and fans.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

June 2012

Number of pages

41 p.

Reference

NF ISO 13379-1

ICS Codes

17.160   Vibrations, shock and vibration measurements

Classification index

E90-379-1

Print number

1 - 11/06/2012

International kinship

ISO 13379-1:2012
Sumary
Condition monitoring and diagnostics of machines - Data interpretation and diagnostics techniques - Part 1 : general guidelines

This part of ISO 13379 gives guidelines for the data interpretation and diagnostics of machines. It is intended to

— allow the users and manufacturers of condition monitoring and diagnostics systems to share common

concepts in the fields of machine diagnostics;

— enable users to prepare the necessary technical characteristics that are used for the further diagnosis of

the condition of the machine;

— give an appropriate approach to achieve a diagnosis of machine faults.

Since these are general guidelines, a list of the machine types addressed is not included. However, the machine

sets covered by this part of ISO 13379 normally include industrial machines such as turbines, compressors,

pumps, generators, electrical motors, blowers, gearboxes, and fans.

Replaced standards (1)
NF ISO 13379
February 2004
Standard Cancelled
Condition monitoring and diagnostics of machines - General guidelines on data interpretation and diagnostics techniques

<p>ISO 13379:2003 gives guidance for data interpretation and diagnostics of machines. It is intended to allow the users and manufacturers of condition monitoring and diagnostics systems to share common concepts in the fields of machine diagnostics; to enable users to prepare the necessary technical characteristics that will be used for the further diagnosis of the condition of the machine; and to give an appropriate approach to achieve a diagnosis of machine faults.</p> <p>Since it gives general guidelines, a list of the machine types addressed is not included. However, the machine sets covered by ISO 13379:2003 will normally include industrial machines such as turbines, compressors, pumps, generators, electrical motors, blowers and fans.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Exigences relatives à la préparation de la surveillance et au diagnostic d'état
    1
  • 4.1 Rôle du diagnostic dans l'exploitation et la maintenance
    1
  • 4.2 Détermination des besoins de diagnostic
    1
  • 4.3 Analyse des modes de défaillance et des symptômes
    3
  • 4.4 Compte rendu des exigences de diagnostic
    6
  • 5 Éléments utilisés pour le diagnostic
    7
  • 5.1 Données de surveillance d'état
    7
  • 5.2 Données relatives à la machine
    9
  • 5.3 Historique de la machine
    9
  • 6 Méthodes de diagnostic
    9
  • 6.1 Deux types de méthodes
    9
  • 6.2 Lignes directrices générales pour la sélection de méthodes de diagnostic appropriées
    10
  • 6.3 Méthodes basées sur les données
    11
  • 6.4 Méthodes basées sur les connaissances
    16
  • 6.5 Détermination du facteur de certitude
    20
  • Annexe A (informative) Analyse des modes de défaillance et des symptômes (AMDS)
    22
  • Annexe B (informative) Efficacité du système de diagnostic
    25
  • Annexe C (informative) Analyse comparative des modèles de diagnostic
    27
  • Annexe D (informative) Modèles de diagnostic les plus couramment utilisés en fonction de la technique de surveillance
    28
  • Annexe E (informative) Exemple de compte rendu de diagnostic
    29
  • Annexe F (informative) Exemple de modélisation par arbre causal: écaillage d'un palier
    32
  • Annexe G (informative) Exemple de détermination du niveau de confiance du diagnostic
    34
  • Bibliographie
    35
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ