NF EN ISO 10140-1
Acoustics - Laboratory measurement of sound insulation of building elements - Part 1 : application rules for specific products
ISO 10140-1:2010 specifies test requirements for building elements and products, including detailed requirements for preparation, mounting, operating and test conditions, as well as applicable quantities and additional test information to be reported.
ISO 10140-1:2010 specifies test requirements for building elements and products, including detailed requirements for preparation, mounting, operating and test conditions, as well as applicable quantities and additional test information to be reported.
L'évaluation des résultats d'un essai interlaboratoire européen réalisé en 1998 a montré que les exigences indiquées dans l'EN ISO 140-1 étaient insuffisantes pour les cloisons à doubles parements légers. L'annexe qui suit est par conséquent ajoutée.
L'évaluation des résultats d'un essai interlaboratoire européen réalisé en 1998 a montré que les exigences indiquées dans l'ISO 140-3 étaient insuffisantes pour les cloisons à doubles parements légers. L'annexe qui suit est par conséquent ajoutée.
Le présent document spécifie une méthode de laboratoire pour le mesurage de la transmission du bruit de choc par les planchers nus ou recouverts d'un revêtement, en utilisant une machine à chocs normalisée.
<p>ISO 140-11:2005 specifies methods for measuring the acoustic properties of floor coverings from the viewpoint of reducing impact sound transmission. The purpose of ISO 140-11:2005 is to establish a method for determining the impact sound insulation of a floor covering under standard test conditions. The test is limited to the specification of procedures for the physical measurement of sound originating from an artificial impact source (tapping machine) under laboratory conditions and is not directly related to the subjective significance of the results.</p> <p>In ISO 140-11:2005, a test method is described using the standard tapping machine to simulate impact sources like human footsteps with shoes. In addition, methods using a modified tapping machine and a heavy/soft impact source are also introduced in informative Annexes C and E for the assessment of impact sound insulation of a floor covering against impact sources with strong components at low frequencies, such as human footsteps or children jumping. As a simplified method for the measurement of the reduction of floor impact sound pressure level by soft and resilient floor coverings, the method using a wooden mock-up floor is introduced in Annex D.</p> <p>ISO 140-11:2005 is applicable to all floor coverings, whether single or multi-layered, as installed on lightweight floors. In the case of multi-layered coverings, they can be factory-assembled or assembled at the test site. The test method is applicable only to laboratory measurements. It does not contain any provision that permits an assessment of the effectiveness of a floor covering in situ.</p>
Le présent document spécifie une méthode de laboratoire pour le mesurage des propriétés d'isolation aux bruits aériens des dispositifs de doublage de paroi. La méthode s'applique à tous les ouvrages et produits utilisés en doublage de paroi horizontale ou verticale.
<p>ISO 10140-1:2016 specifies test requirements for building elements and products, including detailed requirements for preparation, mounting, operating and test conditions, as well as applicable quantities and additional test information for reporting. The general procedures for airborne and impact sound insulation measurements are given in ISO 10140-2 and ISO 10140-3, respectively.</p>
- Avant-proposiv
- Introductionv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Généralités1
-
4 Structure des règles d'application pour des produits spécifiques2
- Annexe A (normative) Murs - Isolation au bruit aérien3
- Annexe B (normative) Portes - Isolation au bruit aérien5
- Annexe C (normative) Fenêtres - Isolation au bruit aérien6
- Annexe D (normative) Vitrage - Isolation au bruit aérien8
- Annexe E (normative) Petits éléments techniques - Isolation au bruit aérien11
- Annexe F (normative) Planchers - Isolation au bruit aérien et au bruit de choc16
- Annexe G (normative) Revêtements acoustiques - Amélioration de l'isolation au bruit aérien17
- Annexe H (normative) Revêtements de sol - Amélioration de l'isolation au bruit de choc21
- Annexe I (normative) Fenêtres avec volet - Isolation au bruit aérien30
- Bibliographie34
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ