NF EN ISO 14713-3

NF EN ISO 14713-3

March 2010
Standard Cancelled

Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3 : sherardizing

ISO 14713-3:2009 provides guidelines and recommendations regarding the general principles of design that are appropriate for articles to be sherardized for corrosion protection.The protection afforded by the sherardized coating to the article will depend upon the method of application of the coating, the design of the article and the specific environment to which the article is exposed. The sherardized article can be further protected by application of additional coatings (outside the scope of ISO 14713-3:2009), such as organic coatings (wet paints or powder coatings). When applied to sherardized articles, this combination of coatings is often known as a “duplex system”.General guidance on this subject can be found in ISO 12944-5 and EN 13438.The maintenance of corrosion protection in service for steel with sherardized coatings is outside the scope of ISO 14713-3:2009.Specific product-related requirements (e.g. for sherardized coatings on fasteners or tubes, etc.) will take precedence over these general recommendations.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2010

Number of pages

17 p.

Reference

NF EN ISO 14713-3

ICS Codes

25.220.40   Metallic coatings
91.080.10   Metal structures
91.080.13   Steel structures

Classification index

A91-130-3

Print number

2 - 01/08/2010

International kinship

ISO 14713-3:2009

European kinship

EN ISO 14713-3:2009
Sumary
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3 : sherardizing

ISO 14713-3:2009 provides guidelines and recommendations regarding the general principles of design that are appropriate for articles to be sherardized for corrosion protection.

The protection afforded by the sherardized coating to the article will depend upon the method of application of the coating, the design of the article and the specific environment to which the article is exposed. The sherardized article can be further protected by application of additional coatings (outside the scope of ISO 14713-3:2009), such as organic coatings (wet paints or powder coatings). When applied to sherardized articles, this combination of coatings is often known as a “duplex system”.

General guidance on this subject can be found in ISO 12944-5 and EN 13438.

The maintenance of corrosion protection in service for steel with sherardized coatings is outside the scope of ISO 14713-3:2009.

Specific product-related requirements (e.g. for sherardized coatings on fasteners or tubes, etc.) will take precedence over these general recommendations.

Replaced standards (1)
NF EN ISO 14713
July 1999
Standard Cancelled
Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines.

Le présent document décrit les recommandations générales relatives à la protection contre la corrosion des constructions en fer et en acier par des revêtements en zinc ou en aluminium.

Standard replaced by (1)
NF EN ISO 14713-3
June 2017
Standard Current
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3 : Sherardizing

ISO 14708-3:2017 provides guidelines and recommendations regarding the general principles of design that are appropriate for articles to be sherardized for corrosion protection. The protection afforded by the sherardized coating to the article will depend upon the method of application of the coating, the design of the article and the specific environment to which the article is exposed. The sherardized article can be further protected by application of additional coatings (outside the scope of this document), such as organic coatings (wet paints or powder coatings). When applied to sherardized articles, this combination of coatings is often known as a "duplex system". General guidance on this subject can be found in ISO 12944‑5 and EN 13438. The maintenance of corrosion protection in service for steel with sherardized coatings is outside the scope of this document. Specific product-related requirements (e.g. for sherardized coatings on fasteners or tubes, etc.) will take precedence over these general recommendations.

Table of contents
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Conception pour la shérardisation
    2
  • 4.1 Généralités
    2
  • 4.2 Préparation de surface
    2
  • 4.3 Considérations de conception
    3
  • 4.4 Jeux des éléments filetés
    3
  • 5 Stockage et transport
    4
  • 5.1 Généralités
    4
  • 5.2 Recommandations pour le stockage et le transport
    5
  • 6 Effet de l'état de la pièce sur la qualité de la shérardisation
    5
  • 6.1 Composition
    5
  • 6.2 État de surface
    5
  • 6.3 Influence de la rugosité de surface de l'acier sur l'épaisseur du revêtement de shérardisation
    5
  • 6.4 Contraintes internes dans le matériau de base
    5
  • 6.5 Objets de grande dimension et aciers de forte épaisseur
    6
  • 7 Effet du procédé de shérardisation sur la pièce
    7
  • 7.1 Au cours du traitement
    7
  • 7.2 Propriétés du revêtement influencées par le procédé de shérardisation
    7
  • 8 Post-traitements
    7
  • Bibliographie
    9
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ