NF ISO 3977-3

NF ISO 3977-3

September 2002
Standard Cancelled

Gas turbines - Procurement - Part 3 : design requirements

This part of ISO 3977 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement.It is not intended to deal with local or national legislative requirements with which the installation may be required to conform.This part of ISO 3977 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and earth moving machines, agricultural and industrial types of tractors and road vehicles.In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), this part of ISO 3977 provides a basis.

See more
Main informations

Collections

National standards and national normative documents

Publication date

September 2002

Number of pages

74 p.

Reference

NF ISO 3977-3

ICS Codes

27.040   Gas and steam turbines. Steam engines

Classification index

E37-501-3

Print number

1 - 07/12/2002

International kinship

ISO 3977-3:2002
Sumary
Gas turbines - Procurement - Part 3 : design requirements

This part of ISO 3977 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement.

It is not intended to deal with local or national legislative requirements with which the installation may be required to conform.

This part of ISO 3977 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and earth moving machines, agricultural and industrial types of tractors and road vehicles.

In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), this part of ISO 3977 provides a basis.

Replaced standards (1)
NF ISO 3977
December 1992
Standard Cancelled
Gas turbines. Procurement.

La présente norme qui s'adresse aux constructeurs et aux utilisateurs de turbines à gaz, précise les spécifications techniques à définir pour l'acquisition d'une turbine à gaz.

Standard replaced by (1)
NF ISO 3977-3
February 2005
Standard Current
Gas turbines - Procurement - Part 3 : design requirements

ISO 3977-3:2004 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement. It is not intended to deal with local or national legislative requirements with which the installation may be required to conform. ISO 3977-3:2004 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and earth moving machines, agricultural and industrial types of tractors and road vehicles. In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), ISO 3977-3:2004 provides a basis.

Table of contents
  • Avant-propos
    iv
  • 1
    Domaine d'application 1
  • 2
    Références normatives 1
  • 3
    Termes et définitions 3
  • 4
    Exigences fondamentales 8
  • 4.1
    Généralités 8
  • 4.2
    Conditions spécifiques du site 8
  • 4.3
    Exigences de fonctionnement 9
  • 4.4
    Exigences de service 10
  • 4.5
    Exigences relatives aux équipements rotatifs 11
  • 4.6
    Autres exigences relatives aux équipements 14
  • 4.7
    Vibrations et dynamique 14
  • 5
    Conditionnement et équipements auxiliaires 20
  • 5.1
    Conception de base de l'ensemble 20
  • 5.2
    Equipements auxiliaires 23
  • 6
    Commande et instrumentation 38
  • 6.1
    Systèmes de commande 38
  • 6.2
    Démarrage 39
  • 6.3
    Prise de charge 39
  • 6.4
    Diminution de charge et arrét 39
  • 6.5
    Ventilation et purge 41
  • 6.6
    Dosage du combustible 42
  • 6.7
    Régulation et limitation 43
  • 6.8
    Lutte antipollution 45
  • 6.9
    Contrôle de survitesse 45
  • 6.10
    Systèmes de protection 46
  • 6.11
    Systèmes de lavage de compresseur 49
  • 6.12
    Considérations relatives au système de commande 49
  • 6.13
    Installation du tableau de commande 51
  • 6.14
    Exploitabilité et diagnostic 51
  • 6.15
    Communications des données 51
  • 6.16
    Applications spéciales 52
  • Annexe A (informative) Fiches techniques
    53
  • Annexe B (informative) Liste des normes nationales ou internationales adéquates
    65
  • Bibliographie
    67
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ